Wall Panels

catiduvar_fibroduvar_icsayf
Besides facade walls, “Polyurethane Insulated Roof Panels” are used as partition walls and ceiling coverings.
Wall panels can be erected horizontal or vertically. Interior and exterior sheet corrugations can be profiled as trapezoidal, lined, or as combination upon request. Standard corrugation profile for interior and exterior sheets are trapezoidal. With the “Hidden screw” joint detail, screws connecting panels to the structural system are not visible.

SPD_1015_alt_tirtil
SPD 1015
Lined on two sides
h=40-50-60-75-100 mm
Panel Length=Minimum 800 mm,
Maximum – transportation limit

Load Value

SPD_1015_ing

Joint Detay

birlesim_detayi

Corrugation Types of Wall Panel

SPD_1015_alt_trapez
SPD 1015
Microlined on two sides
h=40-50-60-75-100 mm
Panel Length=Minimum 800 mm,
Maximum – transportation limit

SPD_1015
SPD 1015
Lined on outside Microlined on inside
h=40-50-60-75-100 mm
Panel Length=Minimum 800 mm,
Maximum – transportation limit

SPD_1015_alt_trapez
SPD 1015
Microlined on outside Lined on inside
h=40-50-60-75-100 mm
Panel Length=Minimum 800 mm,
Maximum – transportation limit

Accessories and Flashings

aksesuar

Accessories:

Sponge sealants are used at the ridges and eaves. Screws are used for fixation of the panels and flashings.

Flashing:

Can be produced at maximum 6 m length, according to desired thickness, color and form. Edge, eaves, corner, window and door flashings etc. are produced according to the exact dimensions from drawings and measurements from the site. Besides weather sealing features these flashings provide esthetical finishings of the claddings.